Official Luthiers Forum! :: View topic - Steve's "Let's swap stuff" sale CLOSED All in the mail today

I'll take the clamps!

Sent from my SGH-T999 using Tapatalk 2

Steve I will take the set of 4 gotoh tuners [:Y:]

Steve,
I'll take the neck jig.... Thanks!

Hey Steve , is the Nicholson #49 an old made in USA one? If so I will take it.

Thanks Steve I have been looking for an American made 49 and 50 for a while.

Steve - I'll take the fret file and the reamer if it's still available!

dpm99 wrote:

Steve - I'll take the fret file and the reamer if it's still available!

Drats...beat me to the file. I'll take it if it falls through.

I'll take the S5 rosewood set Steve. Please let me know shipping cost to Calgary, Canada T2Y 4N7

Your white balance is off on the camera, I believe. You might fool with a few of the presets for that and find that the colors show up appropriately - my guess is most of the wood is much nicer than the photos, which are sort of color washed out.

Filippo

Darrel Friesen wrote:

I'll take the S5 rosewood set Steve. Please let me know shipping cost to Calgary, Canada T2Y 4N7

You got it Darrel, I'll PM you when I get the shipping figured out.

Author:	SteveSmith [ Tue Mar 12, 2013 11:44 am ]
Post subject:	Steve's "Let's swap stuff" sale CLOSED All in the mail today
I'll be adding wood and some tools that I've decided deserve a new home. Please buy these so I can buy your stuff that you don't want anymore You must post in this thread to buy and first post gets first chance. Payments by PayPal; PM me with your email address and shipping address, I will send a PayPal invoice that will include actual shipping costs.

Author:	Steve Jeffries [ Sat Mar 16, 2013 7:47 am ]
Post subject:	Re: Steve's "Let's swap stuff" sale - Not Ready Yet
Let me know what tools you got and I'm in...

Author:	SteveSmith [ Sat Mar 16, 2013 12:55 pm ]
Post subject:	Re: Steve's "Let's swap stuff" sale - Not Ready Yet
Here's the first batch. I also have some back and side sets plus a few more things but I need to get some photos up. I will not be able to ship anything until the end of next week (Mar 26) due to my crazy work schedule this week. First up - Good deals on some tuners T1 - No name open back REDUCED TO FREE with any purchase - - 3L/3R good for an experiment or low-buck replacement Attachment: IMG_1621.JPG T2 - SOLD Gotoh tuners $15 -- SET OF 4 2L/2R for that special 4-string project. I can't remember for the life of me where I used the other 2 Attachment: IMG_1620.JPG T3a and T3b -- Wilkinson Deluxe vintage style $20 REDUCED TO $15 3L/3R -- I have 2 SETS of these Attachment: IMG_1618.JPG Nicholson #49 with handle $28 REDUCED TO $24 -- This one was used only briefly Attachment: IMG_1622.JPG SOLD Jon Simpson Neck Jig $90 -- Never used, a good deal for someone, new cost is $130. Attachment: IMG_1623.JPG SOLD Cam Clamps parts kit $20 -- Needs to go to someone that has more time that I have. I got started but never finished, hate to see it wasted. One 8" clamp is complete and comes with the kit. Parts will make eight 4", six 6", and three 8" reach clamps. Everything is included except the bar stock. You will have to drill the holes for the bars and the roll pins and add some cork to the ends. Attachment: IMG_0624.JPG Attachment: IMG_0628.JPG

Author:	amcardon [ Sat Mar 16, 2013 1:23 pm ]
Post subject:	Re: Steve's "Let's swap stuff" sale
I'll take the clamps! Sent from my SGH-T999 using Tapatalk 2

Author:	Clinchriver [ Sat Mar 16, 2013 1:26 pm ]
Post subject:	Re: Steve's "Let's swap stuff" sale
Steve I'll take the cam clamp parts. Oh well........

Official Luthiers Forum! http://www-.luthiersforum.com/forum/

Steve's "Let's swap stuff" sale CLOSED All in the mail today http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=39684	Page 1 of 2

Author:	SteveSmith [ Sat Mar 16, 2013 1:38 pm ]
Post subject:	Re: Steve's
amcardon wrote: I'll take the clamps! Sent from my SGH-T999 using Tapatalk 2 You've got em. PM me with your info and I'll invoice you.

Author:	WudWerkr [ Sat Mar 16, 2013 4:25 pm ]
Post subject:	Re: Steve's "Let's swap stuff" sale
Steve I will take the set of 4 gotoh tuners

Author:	SteveSmith [ Sat Mar 16, 2013 4:37 pm ]
Post subject:	Re: Steve's "Let's swap stuff" sale
WudWerkr wrote: Steve I will take the set of 4 gotoh tuners Great - PM your info and I'll send an invoice. Probably be late tonight or sometime tomorrow as I'm still at work.

Author:	Jaybird840 [ Sat Mar 16, 2013 9:29 pm ]
Post subject:	Re: Steve's "Let's swap stuff" sale
Steve, I'll take the neck jig.... Thanks!

Author:	SteveSmith [ Sat Mar 16, 2013 9:31 pm ]
Post subject:	Re: Steve's "Let's swap stuff" sale
Jaybird840 wrote: Steve, I'll take the neck jig.... Thanks! Thanks Jay! PM me your address and I'll let you know what the total is with shipping.

Author:	NightOwl [ Sun Mar 17, 2013 11:31 pm ]
Post subject:	Re: Steve's "Let's swap stuff" sale
Hey Steve , is the Nicholson #49 an old made in USA one? If so I will take it.

Author:	SteveSmith [ Mon Mar 18, 2013 6:34 am ]
Post subject:	Re: Steve's "Let's swap stuff" sale
NightOwl wrote: Hey Steve , is the Nicholson #49 an old made in USA one? If so I will take it. I bought several of these about 2 or 3 years ago but I don't know. I will check when I get home tonight and let you know.

Author:	NightOwl [ Mon Mar 18, 2013 9:25 am ]
Post subject:	Re: Steve's "Let's swap stuff" sale
Thanks Steve I have been looking for an American made 49 and 50 for a while.

Author:	SteveSmith [ Mon Mar 18, 2013 7:40 pm ]
Post subject:	Re: Steve's "Let's swap stuff" sale
NightOwl wrote: Thanks Steve I have been looking for an American made 49 and 50 for a while. Sorry, this one is made in Brazil. So is the one I use all the time. Attachment: IMG_1641.JPG

Author:	SteveSmith [ Mon Mar 18, 2013 8:02 pm ]
Post subject:	Re: Steve's "Let's swap stuff" sale
Last round of goodies. Back and side shipping is $15 in the continental US, actual cost anywhere else. S1 Mahogany back/sides $55 REDUCED TO $40 Sides 0.130", 4 3/8" x 32". Back 0.160", 7 3/4" x 21 7/8" Attachment: IMG_1624.JPG Attachment: IMG_1625.JPG S2 Mahogany back/sides $50 REDUCED TO $35 Sides 0.150", 4 3/4" x 32 7/8". Back 0.140", 8 1/4" x 23 7/8" Attachment: IMG_1626.JPG Attachment: IMG_1629.JPG S3 Bubinga back/sides $85 REDUCED TO $70 sides .220", 5" x 33 5/8". Back .220", 8 3/8" x 25" Color is redder than it looks in the photo. Big set. Attachment: IMG_1630.JPG Attachment: IMG_1633.JPG S4 East Indian Rosewood back/sides $55 REDUCED TO $40, sides .120", 5 1/2" x 35 1/2". Back .160", 8 7/8" x 22" Color is darker and deeper than the photo. This set has a dark spot on the back so the price is lower. Attachment: IMG_1637.JPG Attachment: IMG_1638.JPG

Author:	SteveSmith [ Mon Mar 18, 2013 8:08 pm ]
Post subject:	Re: Steve's "Let's swap stuff" sale
S5 East Indian Rosewood back/sides $75 REDUCED TO $55, sides .160", 5 1/4" x 33 1/2". Back .160", 8 3/4" x 22 1/2" Color is darker and deeper than the photo. Nice set, I almost kept it. Attachment: IMG_1639.JPG Attachment: IMG_1640.JPG And a few more tools. SOLD StewMac 3-in-1 fret file $30 includes all 3 burrs Attachment: IMG_1642.JPG Attachment: IMG_1643.JPG GONE TO A NEW HOMEAND FINALLY - a Grizzly 3 degree taper reamer FREE with any other purchase if you would like to have it. Attachment: IMG_1645.JPG

Page 1 of 2	All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/

Author:	dpm99 [ Mon Mar 18, 2013 11:43 pm ]
Post subject:	Re: Steve's "Let's swap stuff" sale - MORE ADDED MON NIGHT
Steve - I'll take the fret file and the reamer if it's still available!

Author:	Steve Jeffries [ Tue Mar 19, 2013 5:55 am ]
Post subject:	Re: Steve's "Let's swap stuff" sale - MORE ADDED MON NIGHT
dpm99 wrote: Steve - I'll take the fret file and the reamer if it's still available! Drats...beat me to the file. I'll take it if it falls through.

Author:	SteveSmith [ Tue Mar 19, 2013 6:58 am ]
Post subject:	Re: Steve's "Let's swap stuff" sale - MORE ADDED MON NIGHT
dpm99 wrote: Steve - I'll take the fret file and the reamer if it's still available! David, they're yours. I got your PM and I'll send you a total shortly - thanks!

Author:	SteveSmith [ Tue Mar 19, 2013 7:17 pm ]
Post subject:	Re: Steve's "Let's swap stuff" sale - PRICES CUT!
Check out the new prices - this stuff needs a new home!

Author:	Darrel Friesen [ Wed Mar 20, 2013 10:22 am ]
Post subject:	Re: Steve's "Let's swap stuff" sale - PRICES CUT!
I'll take the S5 rosewood set Steve. Please let me know shipping cost to Calgary, Canada T2Y 4N7

Author:	SteveSmith [ Wed Mar 20, 2013 12:06 pm ]
Post subject:	Re: Steve's "Let's swap stuff" sale - PRICES CUT!
Darrel Friesen wrote: I'll take the S5 rosewood set Steve. Please let me know shipping cost to Calgary, Canada T2Y 4N7 You got it Darrel, I'll PM you when I get the shipping figured out.

Author:	SteveSmith [ Wed Mar 20, 2013 9:45 pm ]
Post subject:	Re: Steve's "Let's swap stuff" sale - PRICES CUT!
Filippo Morelli wrote: Your white balance is off on the camera, I believe. You might fool with a few of the presets for that and find that the colors show up appropriately - my guess is most of the wood is much nicer than the photos, which are sort of color washed out. Filippo Yep, I noticed that when I got back up to the house and downloaded them. Unfortunately I've have had a lousy work schedule the last few weeks and didn't have time to go reshoot. I was already behind posting things so I just went with it. Oh well, I'll try to fix it next time.

Author:	SteveSmith [ Thu Mar 21, 2013 3:06 pm ]
Post subject:	Re: Steve's "Let's swap stuff" sale - PRICES CUT!
SteveSmith wrote: Darrel Friesen wrote: I'll take the S5 rosewood set Steve. Please let me know shipping cost to Calgary, Canada T2Y 4N7 You got it Darrel, I'll PM you when I get the shipping figured out. Darrel, I PM'd you with the shipping info.